Asset # 17534

HORIZONTAL SCISSOR STYLE SAW

Automatic Band Saw Created to Deliver Extraordinary
Precision with High Accurate Material Indexing

7.5 HP

1-1/2" Blade

NC Back Gauge

Motion Detector

Self Diagnostics

Variable Blade Speed

Full Stroke Vise

features

Saw Head Frame
- The rigid 'C' section frame carries the mountings for the two band wheels, heavy-duty worm drive gear reducer, the band drive motor, and saw guide arm mounting supports.

Band Wheels & Drive System
- The band wheels are cast iron for long, productive life. The deflection free 9.4 inch (240 mm.) wheel spindles ensure the wheels run true regardless of tension stress or cutting loads. The spindle assemblies incorporate tapered roller bearings for greater rigidity and long service life. The wheel tracks the blade so that the back of the band contacts the wheel flanges to support the band. The drive motor is coupled to the transmission through a variable speed pulley.

Drive Wheel Transmission
- The drive wheel transmission is designed and built by Amada to provide high-efficiency speed reduction, which requires no external cooling, to deliver more power to the large diameter drive hub. This hub ensures that this developed torque is transferred to the blade with no strobing, enabling the machine to efficiently cut high alloys as well as free machining materials.

Idler Wheel Motion Detector
- The wheel motion detector will turn off the blade drive in the case where a blade breaks or is jammed in the workpiece. This feature also prevents premature wear on the drive wheel from a stalled band.

Automatic, Powered Chip Conveyor
- The electrically powered chip conveyor auger automatically removes the saw chips from the saw while draining the cutting fluid back into the fluid reservoir. The automatic chip conveyor greatly reduces cleanup time and enables the machine to run longer without operator cleanup.

Full Stroke Vise Clamping
- The work holding and index vise cylinders are both full stroke which eliminates the manual setting of the clamping jaw for the working width.

Narrow Profile Front Vise
- The narrow front vise assembly reduces the butt end remnant to a minimum of 0.3 in. (8 mm.)

specifications

Model		HFA400W
Cutting Capacity	Round (Diameter)	1.18" -16.54"	30 - 420 mm
Cutting Capacity	Rectangle (W x H)	16" x 16"	400 x 400 mm
Work Load Capacity		5,511 lbs	2,500 kg
Saw Blade	Blade Size (L x T x W)	15′ x 0.050" x 1-1/2"	4570 x 1.3 x 41 mm
	Blade Speed	56-295 ft/min Stepless	17-90 m/min Stepless
	Tension Control	Hydraulic
Blade Control	Top Limit Setting	Automatic Setting with Quick Approach Feeler
Blade Control	Cutting Control	Hydraulic Pressure & Flow Control Valve
Vise Operation	Type	Main and Rear Vise
Vise Operation	Control	Hydraulic Full-Stroke Cylinder
Motors	Saw Blade	7.5 HP	5.5 kW
	Hydraulic Pump	2 HP	1.5 kW
	Cutting Fluid Pump	1/4 HP	0.18 kW
Power Requirement	Power Supply Voltage	AC220V±10%, 3 PH, 60 Hz or AC440V±10%, 3 PH, 60 Hz
Power Requirement	Power Requirement	11 kVA
Cutting Fluid	Tank Capacity	31.7 gal	120 liters
Cutting Fluid	Pump Type	Centrifugal Electric Pump
	Pump Capacity	10.6 gal/min	40 L/min
Hydraulic	Tank Capacity	10.6 gal	40 liters
	Pump Type	Variable-Discharge Vane Pump
	Pump Capacity	5.8 gal/min	22 L/min
	Pressure Setting	498 psi	3.5 MPa (35 kgf/cm²)
Chip Disposal		Chip Conveyor
Material Index	Index Mechanism	Shuttle Type
	Stroke	19.6"	500 mm
	Length	0.39-999.999"	10-9999.9 mm
	Number of Input Station	1-99
	Number of Cut-Off Pieces	1-9999
	Remnant Length	3" Plus Length of Parts	76 mm Plus Length of Parts
Machine Dimensions (W x L x H)	Head-Up Position	89.5" x 106.2" x 95.5"	2274 x 2697 x 2425 mm
Machine Dimensions (W x L x H)	Head Down Position	89.5" x 106.2" x 62.0"	2274 x 2697 x 1575 mm
Table Height		31.5"	800 mm
Machine Weight		4,850 lbs	2,200 kg

Saws Horizontal

Ellis 11" x 10" Horizontal Saw, Model 1800 - NEW

Amada Horizontal Scissor Style Saw Model HFA400W

Ellis 11" x 10" Horizontal Saw, Model 1800 - NEW

Ellis Stock Stand for Model 1800's and 2000's – 5’ Long, 4-Rollers, PN 6228

WF Wells 16" x 26" Dual Post Horizontal Saw, Model M-16-2

Ellis 13″ x 16″ Horizontal Saw, Model 4000 – NEW

Ellis Stock Stand for Model 3000's and 4000's – 5’ Long, 4-Rollers (20″ W), PN 6227

Ellis 11″ x 13″ Horizontal Saw, Model 2000 – NEW

Ellis Stock Stand for Model 1800's and 2000's – 5’ Long, 4-Rollers, PN 6228

Ellis Stock Stand for Model 1800's and 2000's – 5’ Long, 4-Rollers, PN 6228

Ellis 13″ x 16″ Horizontal Saw, Model 4000 – NEW

Ellis Stock Stand for Model 3000's and 4000's – 5’ Long, 4-Rollers (20″ W), PN 6227

Wellsaw 10″ x 16″ Horizontal Saw, Model 1016 – NEW

Ellis 13″ x 16″ Horizontal Saw, Model 4000 – NEW

Ellis 11″ x 13″ Horizontal Saw, Model 2000 – NEW

Ellis Stock Stand for Model 3000's and 4000's – 5’ Long, 4-Rollers (20″ W), PN 6227

Ellis 13″ x 16″ Horizontal Saw, Model 4000 – NEW

Johnson 10" x 18" Horizontal Bandsaw, Model J

Ellis Stock Stand for Model 3000's and 4000's – 5’ Long, 4-Rollers (20″ W), PN 6227

Ellis Stock Stand for Model 3000's and 4000's – 5’ Long, 4-Rollers (20″ W), PN 6227