Clausing 15" Swing Geared Head Gap Bed Lathe, Model 804 - NEW

Prices subject to change every 10 days due to economic changes please call us to verify the price!

Clausing/Colchester Geared Head Lathe Features

All head stock gears are hardened and ground

Spindle bearing, gears and shafts are lubricated by a forced lubrication system

An easy-to-read index plate makes it simple to select the proper feed rate or thread

The apron has hardened and ground gears and are lubricated in a bath of oil

Extra wide bed provides accuracy and minimal wear

Easy access pull-out rolling chip bin

Precision Gamet tapered roller spindle bearings

Equipped with chuck guard, full splash guard and leadscrew cover

Clutch drive, reverse leadscrew with spindle turning for faster thread cutting

Clutches are operated by levers at apron and headstock for forward/reverse

A one year warranty and backed by the Clausing Service Center dedicated to support our customers with parts and service

Clausing/Colchester Geared Head Specifications

Capacity	Height of center	7.68"
	Swing over bed	15.75"
	Swing in gap	23"
	Width in front of faceplate	6.5"
	Swing over cross slide	9.7"
	Bedway width	12.5"
Headstock	Spindle bore	2.12"
	Spindle nose (camlock)	D1-6
	Spindle nose taper	4MT
	Number of spindle speeds	16
	Spindle Speed Range (rpm)	25-2000
Cross/Top Slide	Travel of cross slide	9.8"
	Width of cross slide	7.09"
	Travel of top slide	5.1"
	Width of top slide	3.93"
Tailstock	Quill travel	5.5"
	Quill diameter	2.8"
	Quill taper	5MT
Feeds & Threading	Longitudinal feed range	0.0014"-0.048" in/rev
	Number of inch pitches	56
	Range of inch pitches	2-56 TPI
	Number of metric pitches	51
	Range of metric pitches	0.2-14mm
	Number of diametral pitches	20
Feeds & Threading	Range of diametral pitches	8-56 DP
Cont.	Number of module pitches	20
	Range of module pitches	0.2-3.5 MOD
Motor	Spindle motor	7.5 hp
Dimensions	Swing & Center Distance	15" x 50" / 15" x 25'

8042 - 15" x 25" VS Gap Bed Lathe, Dimensions 75" x 63" x 44, 2970 lbs.

8043 - 15" x 50" VS Gap Bed Lathe, Dimensions 99" x 63" x 44", 3,300 lbs.

Standard Equipment

Chuck Guard Accuracy Chart

Covered leadscrew

Electric coolant pump, tank and fittings

Emergency stop button

End guard limit switch

Forward/Reverse/Stop switch

Lockable isolator switch

Splash guard

Tee slotted top slide

One shot saddle and cross slide lubrication

Pullout chip bin

Thread indicator

Tool box with wrenches and dead centers

Instruction and spare parts manual

208/230 or 460 volts phase 60 Hz (other voltages may require a transformer)

Lathes

Kingston HJ-1700 (3") 17" x 67" High Precision Lathe, 3" Spindle Bore - 3PH /440 Volts

Clausing Metosa 13” x 40” Geared Head Lathe, Model C1340S

Clausing Colchester 15.75" x 50" Lathe, Model V390

Clausing 1500 Lathe

LeBlond 32” x 192” Lathe, 2 1/16” Spindle Bore, Model 3220

Clausing Lathe 15"x30" Engine Lathe

Hardinge 11"x 18" Lathe, Model HLV-EM

LeBlond 20" x 60" Servo Shift Lathe

LeBlond Makino 26” x 72” Lathe, 5 ¼” Spindle Bore, Model 26/5 HS

Clausing Metosa 13” x 40” Geared Head Lathe, Model C1340S

Clausing Metosa 13” x 40” Geared Head Lathe, Model C1340S

Clausing Metosa 13” x 40” Geared Head Lathe, Model C1340S

Jet Lathe

LeBlond Makino 15" x 50" Lathe

LeBlond 19” x 50” Regal Lathe, 1 49/64” Spindle Bore

American Lathe

Harrison 18” x 60” Gap Bed Lathe, Model M460

Clausing 15"x 50" Gear Head Lathe, Model 8043SS - NEW

Clausing 15" Swing Geared Head Gap Bed Lathe, Model 804 - NEW

LeBlond 19" x 80" Lathe